International Russian Automation Conference is devoted to discussion of the latest achievements in the field of automation and control systems. It will be held in Sochi, the Russian Federation, on September, 2022. The conference is organized in order to exchange experiences, to promote the discussion and presentation of research papers, summarizing research in universities, industrial enterprises, scientific and industrial associations of the Russian Federation, as well as foreign authors, and research results obtained on the personal initiative of the authors.
The aim of the conference is to promote informing the scientists and practitioners of the most promising areas of research and achievements in the field of automation in technological processes and control systems.
Conference Chair
prof. Radionov A.A., Vice-Rector of the South Ural State University (National Research University), Chelyabinsk, Russia
International Program Committee
prof. Andreev S.M., Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
prof. Bakhvalov S.V., Irkutsk National Research Technical University, Irkutsk, Russia
prof. Dimitrov L.V., Technical University of Sofia, Sofia, Bulgaria
prof. Finayev V.I., Southern Federal University, Taganrog, Russia
prof. Gebel Е.S., Omsk State Technical University, Omsk, Russia
prof. Gvozdev V.E., Ufa State Aviation Technical University, Ufa, Russia
prof. Hramov A.E., Yuri Gagarin State Technical University of Saratov, Saratov, Russia
prof. Hardt Wolfram, Chemnitz University of Technology, Chemnitz, Germany
prof. Hubert Roth, University of Siegen, Siegen, Germany
prof. Kazarinov L.S., South Ural State University (National Research University), Chelyabinsk, Russia
prof. Khramshin V.R., Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
prof. Lyakhovets M.V., Siberian State Industrial University, Novokuznetsk, Russia
prof. Mamedov D.F. oglu, Sumgait State University, Sumgait, Azerbaijan
prof. Mantserov S.A., Nizhny Novgorod State Technical University named after R.E. Alekseeva, Nizhny Novgorod, Russia
prof. Merkuryev I.V., National Research University "Moscow Power Engineering Institute", Moscow, Russia
prof. Petrochenkov A.B., Perm National Research Polytechnic University, Perm, Russia
prof. Sarayev P.V., Lipetsk State Technical University, Lipetsk, Russia
prof. Serdobintsev Yu.P., Volgograd State Technical University, Volgograd, Russia
prof. Shishkov A.N., Moscow Polytechnic University, Moscow, Russia
prof. Strizhak P.A., Tomsk Polytechnic University, Tomsk, Russia
prof. Strzelecki Ryszard, Gdynia Maritime University, Gdynia, Poland
prof. Tudevdagva Uranchimeg, Chemnitz University of Technology, Chemnitz, Germany; Mongolian University of Science and Technology, Ulaanbaatar, Mongolia
prof. Tumenjargal Enkhbaatar, Chonbuk National University, Jeonju, Republic of Korea; Mongolian University of Science and Technology, Ulaanbaatar, Mongolia
prof. Woon Chul Ham, Chonbuk National University, Repiblic of Korea
prof. Zhmud V.A., Novosibirsk State Technical University, Novosibirsk, Russia
Organising Committee
prof. Gasiyarov V.R., South Ural State University (National Research University), Chelyabinsk, Russia
prof. Maklakov A.S., South Ural State University (National Research University), Chelyabinsk, Russia
prof. Kulmukhametova A.S., South Ural State University (National Research University), Chelyabinsk, Russia
REQUIREMENTS FOR SCIENTIFIC CONTENT
Only scientific articles that correspond to the profile of the Conference and reflect the results of theoretical and experimental researches of the authors will be accepted for publication.
The International Program Committee will make the selection of papers. Papers will be reviewed for the technical merit and content. Only original, unpublished contributions will be considered.
The article should have:
- the relevance (subject matter of the article should be interest to the scientific community in terms of the current development of science and technology);
- the scientific character (the article should deal with considered the scientific aspects of the problem, even if the task itself has a practical bias);
- the originality (results that presented in the article should have a scientific novelty, survey articles to be approved by the special decision of The International Program Committee).
The article must be clearly structured to be generally accepted in scientific publications sections, namely:
- introduction;
- relevance, scientific significance of the question with a brief review of the literature;
- setting of the problem;
- the theoretical part;
- practical significance, suggestions and case studies, the results of experiments;
- conclusions.
The results that presented in this paper must be justified by particular scientific tools: experimental mathematical conclusion, mathematical modeling, etc., in order to be considered them as sufficiently reliable. We do not accept materials containing only a hypothesis or untested proposals.
The presented results should be formulated in the form of scientific statements, which clearly define a contribution to science.
The article should be written in an understandable language for an expert in the relevant field. Generally accepted technical terms should be used.
The manuscripts should contain the following information:
- paper title;
- author(s) data (name, title, affiliation, full mail address, phone and fax numbers, e-mail address);
- abstract;
- keywords;
- references.
The number of authors must not be more than three.
The number of articles that the author may publish in one issue must not be more than two.
The volume of the article is 5-6 full pages.
Conferences topics:
1. Process Automation;
2. Modeling and Simulation;
3. Control Theory;
4. Machine Learning, Big Data, Internet of Things;
5. Flexible Manufacturing Systems;
6. Industrial Robotics and Mechatronic Systems;
7. Computer Vision;
8. Industrial Automation Systems Cybersecurity;
9. Diagnostics and Reliability of Automatic Control Systems.
09月04日
2022
09月10日
2022
初稿截稿日期
初稿录用通知日期
注册截止日期
留言