摘要详情

ID / 提交时间

201 / 2023-10-20 22:28:59

标题

Performance test of CuCrZr wire for high magnetic field pulsed magnet

关键字

magnet design,magnet test,pulsed magnetic field,pulsed magnet,tensile test

主题及专题

全体主题

状态

终稿

作者

Shaobo Liu / Huazhong University of Science and Technology；School of Electrical and Electronic Engineering；Wuhan National High Magnetic Field Center

Tao Peng / Huazhong University of Science and Technology；School of Electrical and Electronic Engineering；Wuhan National High Magnetic Field Center

Huidong Shang / Huazhong University of Science and Technology；School of Electrical and Electronic Engineering；Wuhan National High Magnetic Field Center

Shuang Wang / Huazhong University of Science and Technology；School of Electrical and Electronic Engineering；Wuhan National High Magnetic Field Center

Ziying Pan / Huazhong University of Science and Technology；School of Electrical and Electronic Engineering；Wuhan National High Magnetic Field Center

Yihang Huang / Huazhong University of Science and Technology；School of Electrical and Electronic Engineering；Wuhan National High Magnetic Field Center

Liang Li / Huazhong University of Science and Technology；School of Electrical and Electronic Engineering；Wuhan National High Magnetic Field Center

摘要

High magnetic field pulsed magnets are used to generate a magnetic field higher than 45T, which is the highest magnetic field that can be achieved by continuous-operation magnets ( Sometimes referred to as DC magnets ) at present. High magnetic field pulsed magnets will bear huge electromagnetic force in the high magnetic field, so the wires used to make it are required to have high tensile strength. In this paper, the tensile strength of CuCrZr wire is tested, and a small pulsed magnet is made by it, then discharge tests of the pulsed magnet are carried out to verify its reliability. The test results show that the CuCrZr wire meets our needs.