报告详情
  1. 活动首页
  2. 报告清单
  3. 报告详情
Atmospheric plasma sprayed gadolinia-doped ceria electrolyte coatings
编号：21 访问权限：公开 更新：2020-10-22 10:39:40 浏览：927次 张贴报告

报告开始：暂无开始时间（0）

报告时间：暂无持续时间

所在会场：[暂无会议] [暂无会议段]

暂无文件

摘要
Atmospheric plasma spraying (APS) was applied to deposit Gd0.2Ce0.8O1.9 (20GDC) coatings by using different H2 flow rates (3-12 l/min), which aimed to explore the effect of H2 flow rates on the powder melting and coating characteristics. The results showed that with increasing H2 flow rates, the deposition state of 20GDC powder was changed from solid-liquid co-deposition to liquid deposition. Using a 6 l/min H2 flow rate could obtain the best coating with a moderate melting degree, proper impact velocity, and cooling speed. Therefore, the as-sprayed coating possessed the lowest porosity of 7.1%, the highest electrical conductivity (29.3 mS/cm at 750℃), and the best output performance of NiO+GDC/GDC/Silver cell (196 mW/cm2 at 700℃).
 
关键词
gadolinia-doped ceria coating; atmospheric plasma spray; microstructure; electrical property
报告人
ChenSONG
The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.

TaikaiLIU
The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.

ZiqianDENG
The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.

YapengZHANG
The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.

刘敏
The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.

克崧周
The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.

稿件作者
ChenSONG The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.
TaikaiLIU The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.
ZiqianDENG The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.
YapengZHANG The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.
MinLIU The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.
KesongZHOU The Key Lab of Guangdong for Modern Surface Engineering Technology, National Engineering Laboratory for Modern Materials Surface Engineering Technology, Institute of New Materials, Guangdong Acadamy of Sciences, Guangzhou 510651, China.
发表评论
验证码 看不清楚，更换一张
全部评论
重要日期

  • 会议日期

    11月13日

    2020

    至

    11月16日

    2020

  • 10月31日 2020

    提前注册日期

  • 11月05日 2020

    初稿截稿日期

  • 11月16日 2020

    注册截止日期

主办单位
中国机械工程学会表面工程分会
承办单位
广东省新材料研究所
北京大学深圳研究生院
现代材料表面工程技术国家工程实验室
联系方式
登录查看完整联系方式
历届会议
移动端
在手机上打开
小程序
打开微信小程序
客服
扫码或点此咨询